Bridge for Intensive Care Units
Silbermann's Bridge system is designed especially for ICUs
and provides a supply of medical gases, electric sockets,
communication, grounding, and other supplies required
for the patient & the medical staff in the ICU bed or room.
Our system is modular and provides mounting
solutions for all types of required
medical equipment such as monitors, ventilators
fusion & syringe pumps, vacuum therapy, etc.
Downloads:
The bridge includes:
■ Two drop tubes per bed which are anchored to the
concrete ceiling with decorative ceiling covers.
Feeding of electric cable wires, medical gases hoses,
communication and other supplies to the bridge
is done through these tubes.
■ A horizontal beam (2.5 meters long) per bed
is anchored to the drop tubes and includes:
two gliders (per bed) onto which two carriers
are connected; dry and wet.
■ The dry side carrier includes two shelves
with two integrated S.S. hanging rails 10x25 mm
on each shelf.
■ The wet side carrier includes:
two S.S. poles 1m. long with 3 S.S. hooks
on each pole.
■ The bridge is made of extruded aluminum profiles,
White powder-coated color Ral 9016 and a decorative colored strip.
■ Feeding of medical gas is done through
drop tubes with flexible hoses.
Dimensions:
■ Shelf dimensions are:
■ 500x550mm and the
■ The dry carrier is 600x1000mm
■ Wet carrier 200x1000mm
■ Max outlets per bed:
■ Medical gas outlets up to 24
■ Electric sockets up to 40
■ Communication sockets (preparation only) up to 6.
■ Movement of carriers:
■ Linear movement up to 60cm of each carrier
■ Rotation 360° (free rotation) for each carrier
■ Braking of movement:
■ Linear movement by the manual brake.
■ Rotational movement by the frictional brake.
■ Standards and requirements:
■ Meets requirements of NFPA 99c
■ ISO 7396 European standard
■ Carries CE Mark for medical equipment – CE0123
■ G-01 Israeli standard.
